Material Handling

Shop our complete line of Material Handling Products

Shop Now

Allcrete Plaster and Grout Hose Assemblies

Service:  Heavy duty plaster and grout, or cement discharge hose. Easy to handle and kink resistant.

Allcrete Textile Concrete Placement Hose Assemblies

Service:   Plaster and grout and shotcrete applications, handling a multitude of materials being pumped to concrete structures, dams, tunnel faces, swimming pools, etc.

Allcrete Wire Braid Concrete Placement Hose Assemblies

Service:  For handling wet concrete with high head pressures at the critical flex areas of a concrete boom truck and as a discharge hose on the delivery end of high-pressure concrete pumps. This hose exceeds ASME B30.27-2009 and has a 2:1 WP to burst ratio.

Marauder Concrete Placement Hose

Service:  Heavy duty hose for high pressure concrete pumping and spraying plaster, grout, sand, gypsum and ready mixed concrete.

Marauder Wire Braid Concrete Placement Hose 

Service:  For high pressure concrete pumping and heavy duty wire-braid construction for applications needing long lasting durability.

Sand Blast Hose

Service:  For conducting sand, steel shot or other sharp abrasives at high velocity.

Gunite Hose

Service:  Designed for pumping dry sand and cement.

Hot Air Blower Hose

Service:  Designed for conveying hot air from compressors to tanks on bulk dry material carriers.

Dry Materials/Cement Discharge Hose

Service:  For pneumatic transfer of cement or dry powder under low pressure and for use with abrasive slurries.

Elephant Trunk Hose

Service:  Designed for open end cement and abrasives by gravity flow.

Elephant Trunk Hose 5284

Service:  Designed for open end discharge and gravity flow of dry bulk materials and abrasives

Cement Dust Collection Hose

Service:  Specially formulated static dissipative polyurethane hose reinforced with a rigid ABS helix and an embedded copper grounding wire.

180 AR Abrasion Resistant Suction Hose

Service:  Ideal for dry material handling such as crushed rock, sand, gravel, cement, powder, iron ore, grains and any other substance where high abrasion is a factor. Temperature range: -40°F to 140°F.

180 HR High Temp Abrasion Resistant Suction Hose

Service:  Heavy duty suction hose for applications where higher temperature and abrasion are factors such as handling fly ash, crushed rock, sand, pea gravel or cement powder. Temperature range: -40°F to 220°F.

180 BL Abrasion Resistant Blower Hose

Service:  Designed for handling insulation, rockwool, fiberglass, sawdust, grain, cement dust or any other lightweight abrasive materials that can be moved by air pressure. Temperature range: -40°F to 140°F.

Kanaboom Urethane Braided Hydro-Vac Hose

Service:  A Heavy-Duty Abrasive Resistant Hose With a copper grounding wire for handling wet and dry materials. Applications include Hydro-Vac Trucks, Vacuum Trucks and General Construction Temperature range: -33°F to 140°F.

Kanaboom LT Urethane Material Handling Hose

Service:  A Lightweight & Flexible Abrasive Resistant Hose with a polyurethane liner, rigid PVC helix, smooth bore, PVC corrugated O.D. with static dissipating materials. For general construction use, such as rock, gravel, sand and crushed concrete. Industrial vac equipment, roof vacuuming, dry fertilizer and petcoke. Temperature range: -40°F to 150°F.

FDA Clear Braid Urethane Lined PVC Vacuum Hose

Service:  High abrasion resistant "see through" FDA material handling hose for dry transfer of powder, pellets, flour, grains, etc. Temperature range: 40°F to 140°F.

FDA Rubber Materials Handling Hose

Service:  A smooth bore suction and discharge hose designed for abrasives such as grains, flour and pellet transfer. Suitable for wet or dry. Temperature range: -20°F to 180°F.