GLIDETECH® PTFE BIOTECH

GLIDETECH® PTFE BIOTECH

Application

Suction and delivery hose designed according to EN 12115 standards for food, cosmetic and pharmaceutical products, chemicals and solvents, except for chlorine trifluoride, chlorine and fluorine gas, oxygen difluoride, phosgene and molten alkalis (for ex. sodium). Designed for the chemical industry, foodstuff, pharmaceutical and cosmetic industry, where a flexible connection is required. The hose is produced with high quality elastomers, with excellent chemical and mechanical properties. Not intended for use as an implant material. Not suitable for blood or human fluids. Tested and certified hose by INERIS for use in Atex area (Ex-Zone).

Construction

Synthetic plies, stainless steel wire helix, a/s wire to discharge static electricity. Wide corrugated, white with conductive chips, low friction material, non- marking when dragged on the floor, oil, chemical, abrasion, ageing and ozone resistant, easy to clean, glossy cover.

Temperature Range

-40°F (-40°C) to 302°F (+150°C)

Vendor

Tudertechnica


I.D.
O.D.
Vacuum PSI
Length
Working Pressure
Weight per FT
Bend Radius
 
1/2" 1" 13 130' 150 0.33 2.76"
3/4" 1.22" 13 130' 150 0.43 3.94"
1" 1.46" 13 130' 150 0.53 5.12"
1-1/4" 1.73" 13 130' 150 0.61 6.30"
1-1/2" 2.00" 13 130' 150 0.83 7.48"
1.97" 2.60" 13 130' 150 1.23 9.84"
2-1/2" 3.13" 13 65' 150 1.72 12.60"
2.95" 3.58" 13 65' 150 2.00 14.96"
3.94" 4.57" 13 65' 150 2.76 21.65"